LED Ring V2 Connections (Mini USB)

Hello Guys!

In this article you will learn how to properly connect your LED Ring to the Arduino Controller:

On the Arduino board (the black little box), if the port is at the bottom - the cables should be connected as follows:

Here are the LED ring cords colors and connection:

a. Attach a cable from GND on the Ring to GND on the Board [Black].                     

b. Attach a cable from 5v on the Ring to 5V on the Board [Red].

c. Attach a cable from the DIN on the Ring to the D5 on the Board [White].   

      

 

You can also use this simple diagram: